ZMODO ZP-NC18-S
So I updated the firmware on this system and lost remote connectivity. After searching I found that alot of people had this issue and there was nowhere to download a roll back of the firmware. UNTIL NOW. I contacted Zmodo and got the tech to email me the firmware I needed and placed it on GDrive for all.
Use this link CLICK HERE to get the fix to your issue!
WARNING! Make @#$% sure you have the system listed above! Flashing the wrong firmware will turn your system into a brick!
Once downloaded, you can use the Zviewer app (I used the Windows version) to connect to the device and apply the update. If you need help I will be happy to help. Of course I will accept a donation but not requiring it.
To donate, click this link from your cell phone to download the Cash App. The Cash App is owned by Square and charges NOTHING to send money to friends, family, or helpful people working to make your life easier ;) !
http://cash.me/app/whvqxhk
http://cash.me/app/whvqxhk
(336) 825-8128
2823 Spring Garden St.
Greensboro, NC 27403
Thank you, 100x! You saved my NVR :)
ReplyDeleteThanks - I sent request with Zmodo for the old firmware but no response... yet.
ReplyDeleteIn any case - Thanks again. I was getting annoyed not being able to view my cameras locally without having to use meshare which doesn't really allow you to view all the cameras in one view -
I am assuming the only way to transfer this file is saving it to a usb drive and then plugging into camera system DVR and hitting USB update.
ReplyDeleteI saved to USB drive and tried but dvr is saying cannot read update file.
This comment has been removed by the author.
ReplyDeleteLuke, you will need to use Zviewer on your PC to send the file to the NVR, useing the USB wont work with this file, and I am not sure what the NVR is looking for on the USB,
ReplyDeleteUsing Zviewer works like a champ.
thx capt tech,
ReplyDeleteHi i just did what you say but my zmodo server crash stay freeze on the login screen when plug it to the monitor also the internet is not working please advise for some repairs thanks
ReplyDeleteDaniel, you can try to use the firmware directly from ZMODO: http://files.zmodo.com/Software%20Files/NVR%20Tools/Original%20NVR/3520D_8NVR-APP_from_43.8.x.x
DeleteDaniel, you can try to use the firmware directly from ZMODO: http://files.zmodo.com/Software%20Files/NVR%20Tools/Original%20NVR/3520D_8NVR-APP_from_43.8.x.x
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteI have had success flashing the nvr from zviewer. If you can login locally and flash it, wait abt 5 min and power cycle the unit that may work.
ReplyDeleteAlso I have found that Zmodo is updating our units without consent because they are trying to force the new web app (that isn't even ready!!!)
I need help I saw this article like a blessing since I have the same problem.
ReplyDeleteI just "upgrade" my firmware and @##$@, now I cannot access my zmodo.
I click in the link Cpt. Tech provide and I only got a .txt mesage.
Could anybody help me with a new working link ?
The .txt file is the one you need... but you have to use the Zviewer software to send it to your nvr.
DeleteUps sorry.
DeleteMy Zviewer access the cameras but when I try to do remote access I get an error "login fail", any suggestions ?
I would just verify username and password. If you don't have one, maybe delete what's default
ReplyDeleteFluke thanks for your help with Zviewer I'm able to see the cameras live, In the device list i see my camera IPC and Ip number.
ReplyDeletethen the NVR name and IP 192.268.2.36 .
I can access the camera remote setting then then under advance setting I see the UPDATE.
I'm assuming this need to be done (I mean the update) on the NVR.
When I attempt to do the remote setting command I get the login fail.
I deleted zviewer and reinstall.
If i get into the edit the edit device shows a different ip 10.80.1.54 and a port 13210, but those parameters cannot be modified. only user name and password, I use default admin and 111111
Your suggestions are appreciated.
SOLVED !
ReplyDeleteAutomatic search for device does not work. I have to setup my DVR manually and then remote works.
I was able to "upgrade" DOWN... and now is working over explorer!
I can see my beautiful blue screen
Thanks all for your help
Awesome! Glad you got it.
ReplyDeleteJust save the zviewer app.. I've had a few that have auto updated again and I had to re flash them.
I'm having some problem with the funlux zp-nc18-s, after putting the camera to static IP can not find the camera on the network, I try to resetting the NVR but the same thing I get NVR are not seeing camera.
ReplyDeleteI used the IPCSearch but I see only the NVR, I notice that the "Net Con Type" and the "DHCP On/Off" is blankan anyone help me.
Are you still helping people??
ReplyDeleteMan, I need 4.1.0.5 for the ZP-IBH13-W, same issue. Anyone have it????
ReplyDeletecould you please help me out with this? what exactly do I do after downloading this file?
ReplyDeleteDoes anybody have the downgrade for ZP-IBH13-W?????
ReplyDelete